Our Products

Asphalt Drum Mix Plant

Wet Mix Macadam plant



Asphalt paver Finisher

Bitumen Sprayer

Mobile Drum Mix Plant

  Bitumen Pressure Distributor


MODEL BS/42/4000/5000/6000/8000

Truck mounted self propelled Bitumen Pressure Distributor with suitable heating system and variable spray bar to operate on constant pressure system, complete with air-compressor, bitumen pump, auxiliary engine, tank mounting and other accessories for uniform and constant rate applications of hot bitumen (or cold tar) as per the specifications indicated below.

BITUMEN TANK    
Capacity : 4000 / 5000 / 6000 / 8000 litres
Thickness of shell : 4 mm.
Shape : Rectangular / Oval shape with light resin bonded rock wool insulation 50 mm. thick.
Filling of Tank : i) Through manhole. ii) Through self-priming by own pump.
Filter : Removable screen filter.
Manhole : 600 mm. dia.
Temperature : Dial type thermometer of range 0° to 250° (minimum).
Tank Contents
Measurement
:
With calibrated dipstick
     
POWER PACK    
Engine : 4 - Stroke twin cylinder air / water cooled diesel engine of 25 hp at 2000 RPM.
Bitumen Pump : Shuttle Block Type 380 to 450 litres per minute.
Compressor : Double cylinder 3 HP. Pressure 9 Kg./sq. cm. maximum. Capacity 360 litres.
     
HEATING    
Type of Burner : Single high pressure oil burner for adequate heating of viscous binder, oil consumption 20 lt/hr.
Tank Capacity : 50 litres.
Fire Tube : 230 mm. dia.
     
SPRAY BAR    
Type : Folding type fitted with pressure gauge, regulating
Pre-heating of spray bar : By full circulation of preheated bitumen.
Distance of nozzles : 225 mm.
Cleaning : By air pressure or diesel oil.
Width : Variable width from 2.4 to 4.2 metres by extension bar
Width Adjustment : By closing of nozzles.
Adjustment of height : Mechanical.
Hand lances : 2 Nos
Spraying pressure : To be adjusted between 0-6 bars.
Rate of application : 0.3 to 1.0 Kg. / sq.m. Calibration chart will be provided inside the driver's cabin and at the operator's platform.
 
OPERATION
The operation of the spray bar is from operator's platform at the rear.
 
TRUCK
TATA 1613 SE Truck Chassis of WB-4225 mm. and 4x2 configuration or equivalent. The driver's cabin will be built as per R.T.O. requirement. The battery used for starting the diesel engine conforms to ISI.
 
ISI SPECIFICATIONS
All the bought-out components conform to relevant ISI specifications and are of reputed make.
OPTIONAL
Trolley mounted in place of Truck mounted.
 Copyright © 2008 Shakti Engineers.                                                                                                                                  Website Designed and Developed By Skytri Web Solutions